Vertical Type Single Stage Double Suction Large Capacity Pump

Product Description

Application:

Vertical Type Single Stage Double Suction Large Capacity Pump which is connected directly with motor by couplings. It is new series of products after the constructional optimization based on type XS Pump. It is widely used for water supply & drainage in factories, cities, mines, power stations and water conservancy.

Characteristic:
Compact structure,beautiful outline,stable operation,low noise;
Both inlet and outlet of this pump are placed under the axial line,so it is unnecessary to remove the inlet and outlet pipeline and motor;
The shaft seal of water pump has fine mechanical seal and soft stuffing seal,which can be selected according to different condition by user;
The impeller is static-balance calibrated,fixed on the shaft with round nut,and its axial position can be adjustedvia the round nut;
The pump is direct drived by motor via resilient coupling,it can be drived by internal combustion engine if it is necessary.

General:

Pump outlet diametre

Dn: 80~800mm
Capacity: Q: 22~11600m3/h
Head: H: 7~200m

Temperature T: -20~105 Deg C, -60~200 Deg C
Solid Parameter

Construction Drawing:

Pump Medium:

Clean water and other liquids that their physical and chemical property is similar to clear water, solid contents don't exceed 80mg/l; It can pump industrial corrosive waste water, seawater and rainwater including suspend substance etc, when adopting special material.

Structure type:

The split-casing centrifugal pump is horizontal, the pump case is horizontal on the shaft axial, the up parts is the pump cover, the down parts is the pump casing, the suction and the discharge are all under the axial, its centerline is perpendicular to the axis.It can open the pump cover and take out the rotor parts without disassembling the inlet and outlet pipes when overhauling.The shaft sealing is the soft packing sealing or the mechanical sealing.

The rotation direction:

Viewed from motor, the direction of the pump is anti-clockwise,that is the suction in the left, the discharge in the right.

The rotating direction of the type xxxS-xx pump is clockwise, that is the suction in the right, the discharge in the left.

Also can move the driver to another edge according to the user’s requires. Then, the rotating direction, the suction and discharge direction is in the opposite as the described above.

The main parts materials:

The materials of the flow parts is the casting iron, the impeller can be the casting steel and the brass if in need, but should remark in the contract.

Performance Data:

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Power(kW)		EFF (%)	NPSH (m)	Weight (Kg)
				Shaft	Motor
				Shaft	Motor
300S96	360 485 612	104 96 90	1450	135.9 154.6 187.5	250	75 82 80	5	828
300S96A	342 468 540	95 89 84	1450	119.6 141.8 158.4	220	74 80 78	5.1	828
300S96B	320 450 520	86 80 74.9	1450	104.1 124.1 137.8	185	72 79 77	5.3	828
250S85	360 485 600	91 85 77	1450	122 144 166	220	73 78 76	4	515
250S85A	340 456 565	80 75 68	1450	103 121 140	185	72 77 75	4.2	510
250S65	360 485 612	71 65 58	1450	92.8 108.7 130.6	132	75 79 74	3	480
250S65A	342 468 540	61 54 50	1450	77 89 98	110	74 77 75	3.1	480
250S65B	320 450 520	51 45 41	1450	63.5 74.5 79.5	90	70 74 73	3.2	480
250S39	360 485 612	42 39 32	1450	54.2 61.3 67.5	75	76 84 79	3.2	380
250S39A	324 468 576	35 30 25	1450	41.7 48.4 50.9	55	74 79 77	3.3	380
250S24	360 485 576	27 24 19	1450	33.1 36.9 36.4	45	80 86 82	3.5	370
250S24A	342 414 482	22 20 17	1450	25.6 27.2 27.9	37	80 83 80	3.6	370
250S14	360 485 576	16 14 11	1450	19.6 21.5 22.1	30	80 86 78	3.8	32
250S14A	320 432 504	13 11 8	1450	14.5 15.8 14.6	18.5	78 82 75	3.9	320
300S90	590 790 936	93 90 82	1450	202 242 279	315	74 80 75	4	840
300S90A	576 756 918	86 78 70	1450	190 217 247	280	71 74 71	4.1	840

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Power(kW)		EFF (%)	NPSH (m)	Weight (Kg)
				Shaft	Motor
				Shaft	Motor
300S90B	540 720 900	72 67 57	1450	151 180 200	220	70 73 70	4.2	840
300S58	576 790 972	63 58 50	1450	131.8 147.9 165.5	200	75 84.2 80	4.4	810
300S58A	529 720 893	53 49 42	1450	100.5 118.6 130.9	160	76 81 78	4.5	810
300S58B	504 684 835	46 43 37	1450	87 100 108	132	73 80 78	4.7	810
300S32	612 790 900	36 32 28	1450	75 79 86	90	80 87 80	4.6	710
300S32A	551 720 810	31 26 24	1450	58.1 60.7 67.9	75	80 84 78	4.8	710
300S19	612 790 935	22 19 16	1450	45.9 47 47.9	55	80 87 85	5.2	488
300S19A	504 720 829	20 16 13	1450	38.7 39.2 39.1	45	71 80 75	5.4	488
300S12	612 790 900	14 12 10	1450	29.2 30.4 33.1	37	80 85 74	5.5	660
300S12A	522 684 792	11 10 8	1450	21.7 23.9 22.7	30	72 78 76	5.6	660
350S125	850 1260 1660	140 125 100	1450	463 530 628	710	70 81 72	5.4	1580
350S125A	803 1181 1570	125 112 90	1450	391 462 550	630	70 78 70	5.6	1580
350S125B	745 1098 1458	108 96 77	1450	313 373 425	500	70 77 72	5.8	1580
350S75	972 1260 1440	80 75 65	1450	271 303 319	355	78 85.2 80	5.8	1200
350S75A	900 1170 1332	70 65 56	1450	220 247 257	280	78 84 79	6.0	1200
350S75B	828 1080 1224	59 55 47	1450	177.4 197.3 203.5	220	75 82 77	6.2	1200

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Power P(kW)?		EFF (%)	NPSH (m)	Weight (Kg)
				Shaft	Motor
				Shaft	Motor
350S44	972 1260 1476	50 44 37	1450	163.4 171.6 188.3	220	81 88 79	6.3	110
350S44A	864 1116 1332	41 3 30	1450	121 130 136	160	80 84 80	6.4	1105
350S26	972 1260 1440	30 26 22	1450	99 101.4 105	132	80 88 82	6.7	875
350S26A	864 1116 1296	26 21 16	1450	76.5 76.9 77.4	110	80 83 73	6.8	875
350 16	972 1260 1440	20 16 13	1450	63.8 63.8 68.9	75	83 86 74	7.1	760
350S16A	864 1044 1260	16 13 10	1450	51 47 49	55	74 79 70	7.2	760
500S115	2150 2500 2850	120 115 106	1480	937 1004 1097	1250	75 78 75	8.8	2600
500S98	1620 2020 2340	114 98 79	970	644.8 673.9 680.3	800	78 80 74	4	2400
500S98A	1500 1872 2170	96 83 67	970	509 535.6 542	630	77 79 73	4.1	2400
500S98	1400 1746 2020	86 74 59	970	431.4 451.1 432.8	560	76 78 75	4.2	2400
500S59	1620 2020 2340	67 59 47	970	374 391 374	450	79 83 80	4.5	2240
500S59A	1500 1872 2170	57 49 39	970	315 329 320	400	74 76 72	4.6	2235
500S59B	1400 1746 2020	46 40 32	970	240 257 248	315	73 74 71	4.7	2230
500S35	1620 2020 2340	40 35 28	970	207.6 218.8 209.9	280	85 88 85	4.8	1640
500S35A	1400 1746 2020	31 27 21	970	144 151 138	220	82 85 84	4.8	1640
500S22	1620 2020 2340	24 22 19	970	137.5 144.1 142.4	185	77 84 85	5.2	1558

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Power(kW)		EFF (%)	NPSH (m)	Weight (Kg)
				Shaft	Motor
				Shaft	Motor
500S22A	1400 1746 2020	20 17 14	970	103 101 94	132	74 80 82	5.3	1555
500S13	1620 2020 2340	15 13 10	970	83.8 86.2 79.7	110	79 83 80	5.7	1505
600S22	2520 3140 3600	25 22 18	970	209.2 215.8 215.2	250	82 88 82	7	2500
600S22A	2160 2860 3240	21 18 16	970	152.5 161.1 168.1	185	81 87 84	7.1	2500
600S32	2160 3170 3600	36 32 27	970	278.6 310.4 311.4	355	76 89 85	7	2550
600S32A	1800 2850 3240	30 26 23	970	240 229 236	280	72 88 86	7.1	2550
600S47	2160 3170 3600	56 47 40	970	412 456 456	560	80 89 86	6.5	3850
600S47A	1980 2920 3240	56 40 37	970	318 361 380	450	78 88 86	6.6	3850
600S75	2160 3170 3600	84 75 67	970	568 736 821	900	87 88 80	6	4300
600S75A	1980 2950 3240	74 65 60	970	486.6 600.2 662.8	710	82 87 80	6.1	4300
600S75B	1800 2710 3060	60 55 51	970	367.6 477.5 531.3	560	80 85 80	6.2	4300
600S100	2160 3170 3600	110 100 92	970	829.6 1015.6 1073.8	1400	78 85 84	6	7188
600S100A	1980 3000 3240	100 90 85	970	691.3 875.4 914.6	1120	78 84 82	6.2	7158
600S100B	1800 2830 3060	90 80 75	970	588.2 751.9 781.3	1000	75 82 80	6.4	7116
800S22	4320 5500 6480	25 22 19	730	358.7 370.2 389.9	450	82 89 86	7	4500
800S22J	3000 4400 5040	16 14 12	585	163.4 190.6 193.8	250	80 88 85	5	4500

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Power(kW)		EFF (%)	NPSH (m)	Weight (Kg)
				Shaft	Motor
				Shaft	Motor
800S22A	3960 4830 5500	19 17 15	730	246.9 254.1 261.2	3154	83 88 86	7.2	4500
800S22AJ	2800 3870 4500	13 11 9	585	123.9 133.3 131.3	185	80 87 84	5.1	4500
800S32	4320 5500 6480	35 32 29	730	502.2 538.5 588.2	630	82 89 87	7	5100
800S32J	3000 4400 5200	23 20 18	585	234.9 272.3 299.9	315	80 88 85	4.5	5100
800S32A	3500 4950 6000	30 26 23	730	353 398 437	450	81 88 86	7.1	5100
800S32AJ	3700 3960 4680	19 17 14	585	174.6 210.7 212.4	250	80 87 84	4.6	5100
800S47	4320 5500 6480	51 47 42	730	740.7 782.2 842.2	1000	81 80 88	6.5	7300
800S47J	3000 4400 5200	35 30 26	585	357.4 403.9 428.1	450	80 89 86	4	7300
800S47A	3500 5070 6000	45 40 36	730	530621 684	710	81 89 86	6.6	7300
800S47AJ	2800 4060 4800	30 25 22	585	285.9 314.1 334.4	355	80 88 86	4.1	7300
800S76	4000 5500 6500	80 76 71	730	1103.1 1293.6 1444.6	1600	79 88 87	6	7888
800S76J	3000 4400 5500	54 49 43	585	551.1 674.9 757.7	800	80 87 85	4	7888
800S76A	3500 5080 6000	70 65 62	730	845 1034 1206	1250	79 87 84	6.1	7815
800S76AJ	2800 4070 5000	48 42 37	585	463 541 607	630	79 86 83	4.1	7815
800S76B	3000 4680 5500	60 55 51	730	628.6 824.7 920.3	1000	78 85 83	6.2	7762
800S76BJ	2500 3750 4500	40 35 30	585	358.3 425.5 459.6	500	76 84 80	4.2	7762

Type	Capacity (m3/h)	Head (m)	Speed (r/min)	Power(kW)		EFF (%)	NPSH (m)	Weight (Kg)
				Shaft	Motor
				Shaft	Motor
1200S22	7920 9612 10800	25.5 22 18	500	644 662 638	800	85.5 87 83	5.8	17000
1200S22A	7200 9000 10080	22.8 20.2 17.5	500	534 573 585	710	83.8 86.5 82.2	5.9	17000
1200S32	8640 10800 12960	35 32 26	600	992 1082 1073	1400	83 87 85.5	7.7	19300
1200S32A	7776 9720 11664	32.5 29 23	600	834 887.5 860	1250	82.5 86.5 85	7.8	19300
1200S39	7200 9000 10800	42.5 39 33	500	1023 1092.4 1155	1600	81.5 87.5 84	5.5	21000
1200S39A	6480 8100 9720	38.5 35 29	500	849 892.5 925	1250	80 86.5 83	5.7	21000
1200S39B	5832 7390 8748	34 31 25.5	500	675 718 741	1000	80 85.7 82	5.9	21000
1200S56	8640 10800 12960	60.5 56 47.5	600	1736 1871 1960	2240	82 88 85.5	7.5	22500
1200S56A	7776 9720 11664	54.5 50 42	600	1452 1512.6 1597	2000	81 87.5 83.5	7.7	22500
1200S56B	6998.4 8748 10497.6	49 44 36.6	600	1167 1218.9 1280	1600	80 86 81.5	7.9	22500
1200S72	10224	72	746	2251	12500	89	11.7	23500
1400S24	18000	24	370	1377	1600	85.5	9.5	28000
1400S25	16000	25	370	1251	1600	87	8.9	28000

Connection Flange Dimension:

Hydraulic Coverage & Performance Curve:

Certificate

Factory

Delivery

Customer Visit

Our Company

Our Service

1.All products will be well packed before shipping.

2.All products have 12 months warranty and we sure the products will free from maintenance within warranty period.

3.Reply your inquiry in 24 working hours.

4.Customized design is available.

5.Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers.

6.As an honest seller,we always use high quality material,advanced machines,skilled technicians to ensure quality.

7.Have our owm engineer team,each machine is design as customer's specfic requirement,the performance is higher 20%~40% than other factory with same cost.

Place of Origin	China
Brand Name	clean water pump
Model Number	clean water pump
Min.Order Quantity	One set Vertical Type Single Stage Double Suction Large Capacity Pump
Price	[email protected]
Delivery Time	Within 5 working days
Payment Terms	paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
Supply Ability	167

Vertical Type Single Stage Double Suction Large Capacity Pump

Product Features