SELF-PRIMING PERIPHERAL PUMP
Application
Clean water without abrasive particles / Non-aggressive liquid.
Domestic use.
In particular for delivering water in combination with small pressure sets and for irrigation.
Installed in enclosed places, or at least protected against inclement weather.
Operating Conditions
Suction lift up to 8 m.
Liquid temperature up to +40℃.
Ambient temperature up to +40℃.
Max. Working pressure: 6 bar.
Motor
2 pole induction motor.
Single-phase, 50Hz / 60Hz.
Insulation: Class B.
Protection IP 44.
With capacitor and thermal overload protection.
Material
Pump body: Cast iron.
Motor support: Aluminum / Cast iron.
Impeller: Brass.
Motor shaft: Stainless steel or CS45#.
Mechanical seal: Ceramic-Graphite.
Copper Winding.
Model |
Power |
Inlet |
Outlet |
Max Flow |
Max Head |
Max Suction |
DIM |
Weight |
20' |
|
Single-Phase |
kW |
HP |
(m) |
(kg) |
(Loading Qty) |
|||||
QB60 |
0.37 |
0.5 |
1" |
1" |
1.6 |
33 |
8 |
280×140×170 |
6 |
3300 |
QB70 |
0.55 |
0.75 |
1" |
1" |
2.4 |
48 |
8 |
335×190×205 |
9 |
2220 |
QB80 |
0.75 |
1 |
1" |
1" |
3 |
60 |
8 |
345×190×200 |
9.5 |
2150 |
