Product Description
V750F 100% copper wire stainless steel drainage sewage submersible shimge water pump
1.Applicatiom
WQ series submersible sewage pump consists of pump,mechanical seal and motor. Pump is at the lower part of sewage pump, Motor located at the upper part of the motor pump, which is three phase electric motor. Mechanical seal is between pump and motor and it is a kind of double end mechanical seal.,"o" rings are applied in all static joints of the submersible pump. WQ submersible sewage pump widely usded in agriculture, architecture, mine,environment protection and industry,such as drainage slurry ,wastewater,which contained short fibre,wastepaper ,sand ,and so on.
2.Service condition
1).Medium temperature does not exceed 40℃. medium density≤1050kg/m³, PH value in the range of 4-10.
2).Minimum operating level: reference installation dimension diagram(with the motor cooling system) or(without motor cooling system).
3).The main parts of pump is cast iron and ductile iron, it can not be used in pumping corrosive or contain corrosive solid particles media.
4).The diameter of the solid media should not exceed the minimum size of runner. It is recommended for the size of the flow channel is beloe 80% and the size of runner are "the main parameters" of the pumps, the length of the fibers should not exceed the discharge diameter of the pump.
5).submersible depth of not more than 5m.
Company Information
What about our company?