Model name:
SBS700-710 split casing double suction centrifugal pump
Description
SBS700-710 is horizontal, single stage, axially split case, double suction, between bearing, centrifugal pumps. It’s suitable for pumping clean water or slightly contaminated water or liquids which is physically and chemically similar to water, where large quantity and certain head are required. The axially split casing design makes it’s easy to remove the upper volute casing and rotary components without disturbing the motor and the pipework. And the double suction impeller ensures high efficiency.
Application
Water transport
Water supply and distribution
Irrigation, drainage and flood control
District cooling/heating
Fire fighting
Operation data
| Suction/Discharge flange | 800mm x 700mm | 32" x 28" |
| Working pressure | upto 2.5MPa | up to 362.6 psi |
| Working temperature | up to 120℃ | up to 248° F |
Material Available
| Pump Part | Material Combination | ||||||||
| cast iron | ductile iron | carbon steel | SS 304 | SS 316 | duplex | super duplex | bronze | ||
| Casing | cast iron | ductile iron | carbon steel | SS 304 | SS 316 | duplex | super duplex | bronze | |
| impeller | cast iron | ductile iron | carbon steel | SS 304 | SS 316 | duplex | super duplex | bronze | |
| Shaft | SS 420 | SS 304 | duplex | super duplex | |||||
| Seal housing | cast iron | ductile iron | carbon steel | SS 304 | SS 316 | duplex | super duplex | bronze | |
| Stationary Ring | carbon steel | SS 304 | SS 316 | duplex | super duplex | ||||
Design features
Axially pump casing
The casing is axially split, the inline suction and the discharge nozzles are in lower half casing, these design makes it’s easy to remove the upper casing and rotary components without disturbing the motor and the pipework.
Dual Volute Casing
Pumps generating high heads have dual volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads.
Between bearing design
Less shaft deflection due to the between-bearing design.
Wear Rings
Easily replaceable casing wear rings, protect the pump casing from the abrasion of impeller. Overall cost of operation is minimized.
Sealing Flexibility
Pump can be sealed by gland packing or wide range of mechanical seals.