Hermetic CAM2 series refrigeration liquied ammonia pumps

Product Description

Hermetic CAM2 series liquied ammonia pump

Hermetic canned motor pumps,CAM2 and CNF series are designed especially for refrigeration application.Hermetic CAM2 series are multistage while CNF series are single stage pumps and both CAM2(CAM2/4 AGX3.0 CAM2/3 AGX3.0 CAM2/4 AGX4.5 CAM2/5 AGX4.5 CAM2/6 AGX6.5) and CNF(CNF32-160 AGX3.0 CNF32-200 AGX4.5 CNF40-160 AGX4.5 CNF40-200 AGX4.5 CNF50-160 AGX6.5 CNF50-200 AGX8.5) are horizontal construction with axial suction branch and radial discharge branch.

Hermetic Application

For pumping any media applied in refrigeration industry:for instance,ammonia,Freon,Silicone oil etc.

Material

Pump cashing:Nodular cast iron
Impeller:Grey cast iron(HT250)
Stage casting:forged steel(20#)
Shaft:2Cr13
Stator can:1.4571
Bearings:2Cr13/FH82APerformance Table

Detailed Images

Circulation

In Hermetic refrigeration pumps,only high-pressure inner circulation is applied.Compact constitution,reduce pipeline's setting.DimensionDimension Drawing Type CAM2/CNF

Why choose us?

We are a consulting and engineering company with main business line of Industry Refrigeration products.

Hermetic CAM2 series refrigeration liquied ammonia pumps Blue is an energetic runner in market of Industrial Refrigeration, Freezing, and Cold Storage,Hermetic CAM2 series refrigeration liquied ammonia pumpsing on offering solution and equipments with advanced technology in market of industrial refrigeration, cold storage, quick freezing and coldchain logistics.

We offer solutions and advanced refrigeration equipments for all kinds of food processing, cooling,freezing and deep freezing projects.

Our rapid growth and success can be attributed to our dedication to quality, technical expertise, cost efficiency,and high technology capabilities.

FAQ1)In low temperature operating condition,we advice you to adopt the water defrosting mode,and operate strictly according with the relevant operating instructions during water defrosting process.

2)During ammonia+water defrosting,operate strictly according with relevant operating instructions.During defrosting,the pressure of heated ammonia shall be lower than 0.4Mpa,otherwise it will damage the equipment and cause danger.

3)In low temperature operating condition,we don't recommend electric heating tube defrosting without special circumstances.

4)To ensure the air cooler to run with high efficiency,we advice that the frosting thickness of fin shall not be over 1/2 of the pitch of fins otherwise timely defrosting work is needed.