hydraulic pipe profile bending machine and fold rolling machine|hydraulic pipe profile bending machine and fold rolling machine|hydraulic pipe profile bending machine and fold rolling machine
Specification:
Colour:gray
Automatic:Hydraulic
Hydraulic pipe bending machine
Bend type:stainless steel,angle steel,steel bar,flat steel,channel steel,all kinds of copper,aluminium, stainless steel profiles and tubes&pipes
Operating system:hydraulic
Total hydraulic flexible profile bending machine
1.Perfectly complete pre-bending,rolled-up,roll calibrate.
2.Working principle: two down rollers as main driving roller,or all three rollers as main driving roller,with upper roller fixed and two down rollers do up-and-town movement around one fixed center.
3..Triple geared drive,low voltage driver,low current consumption and high efficiency.
4.Well hydraulic control,displacement liquid-crystal display with accuracy+_0.1mm
5.The two touch steel stick can permit the good finishing quality of asymmetric plate section bending.
6.Advanced and compact structure with full function.
7.The machine has six oil tanks(two big oil tanks,four small oil tanks),and the head is vertically.
8.The yield strength bended profile with 320Mpa (Max.).
9.Full function,complicated structure,high precision and very stronger.
No. |
Technical Data |
W24S-38 |
1 |
Max. Bending resistant modulus |
45CM3 |
2 |
Yield limit |
245Mpa |
3 |
Mould Diameter |
different specification Profile matches with different specification mold |
4 |
Down roller speed |
120-150mm/ min |
5 |
Min. Rolling diameter under full load condition |
Depends on the profile material |
6 |
Shaft diameter |
120 mm |
7 |
Drive roller diameter |
320 mm |
8 |
Bending speed |
6m/min |
9 |
Hydraulic pressure |
40Mpa |
10 |
Motor |
15KW |
11 |
Hydraulic Device |
Yuken |
12 |
Control Device (PLC) |
hydraulic pipe profile bending machine and fold rolling machine |
13 |
Electrical Components |
hydraulic pipe profile bending machine and fold rolling machine |
14 |
Touch screen |
Weinview |
15 |
Weight |
6800Kg |
16 |
Outside dimension |
2250x1880x1650mm |
Profile Steel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, hydraulic pipe profile bending machine and fold rolling machine mechanical systems such as ventilation, air conditioning, and other mechanical systems. Strut channel is also used for other applications Profile Steel that require a strong framework, such as workbenches, shelving systems, equipment racks, etc. Specially made sockets are available to tighten nuts; bolts etc.
KJJKGJH
Profile Steel is equipped with excellent equipments including two sets 1450 reversible rolling mills,hydraulic pipe profile bending machine and fold rolling machine three sets 1150 reversible rolling mills, two sets galvanizing & galvalume lines, two sets color coating lines, one set correcting machine, and one set pickling line.