Steel Pipe Profile CNC Plasma Cutter
Pipe cutting
Technical parameters for steel pipe profile CNC plasma cutter:
1.Pipe diameter applicable:Φ50-Φ600/800/1200/1500mm
2.Cutting Pipe wall thickness: 1-8mm (plasma cutting) or as per plasma generator; 5-60mm(flame cutting)
3. Cutting speed: plasma cuttingspeed: 50—3800 mm/min;
flame cutting speed: 50-750mm/min
4. Number of axis under control: 3-6 Axes
Work piece axis of rotation(X)
Cutting the first work piece along the axis of axial movement(Y)
Cutting torch along the axial swing axis work piece (Z)
Cutting torch along the work piece swing radial axis (W)
Cutting the first spindle axis vertical take-off and landing (U)
Cutting nozzle strength out and draw back axis (V)
5.Angle of bevel: plasma cutting±45°(adjustable);flame cutting:±60°(adjustable)
6. Cutting Pipe length: ≤12000mm
7. Max load pipe weight: 4000KGS
8. CNC system: original import IPC
9. Control way: full CNC control with touch screen & man-machine interface
10. Integrated precision of the machine:
Portrait Moving Error: ≤±0.2mm/1000mm
Turning Angle Error: ≤1° per 180°
Surface quality: Clean and no dregs
Repeat positioning accuracy: ≤±0.3mm
Basic Configuration of the cnc plasma cutter:
NC pipe Profile cutting machine mainly are consists of the control system, machine arm system, driving unit, clamp unit, support unit, guide rail, airway system, control cabinet and operation table, etc. One set of flame cutting system (including plasma cutting) is provided as the main cutting system. (Or as per customer’s request)
Positioning Precision
(1)X Axis |
(√) |
|
|
Driving system |
Driving by precise gear box and transmission gear pair |
|
Rev |
0.01-8r/min |
|
Servo motor |
Panasonic motor |
|
Positioning precision |
±0.1mm |
(2)Y Axis |
(√) |
|
|
Driving system |
Driving by Precision gear box, transmission by gear and rack |
|
Track length for cutting head(Max travel stroke) |
12000mm |
|
Servo motor |
Panasonic motor |
|
Positioning precision |
±0.2mm |
(3)Z Axis |
(√) |
|
|
Driving system |
Driving by precise gear box |
|
Swing angle |
±60° |
|
Servo motor |
Panasonic motor |
|
Positioning precision |
±0.1mm |
(4)W Axis |
(√) |
|
|
Driving system |
Driving by precise gear box |
|
Swing angle |
±60° |
|
Servo motor |
Panasonic motor |
|
Positioning precision |
±0.1mm |
(5)U Axis |
(√) |
|
|
Driving system |
Driving by precise gear box and ball screw |
|
Stroke of cutting head |
400mm |
|
Servo motor |
Panasonic motor |
|
Positioning precision |
±0.2mm |
(6) V Axis |
(√) |
|
|
Precision gear box, ball screw transmission |
|
|
Cutting head up and down stroke |
100mm |
|
Servo motor Panasonic motor |
|
|
Position accuracy |
±0.2mm |
|
|
|
Cutting Item (Illustration)
Refer to the Product Manual (omitted).
The max angle of bevel: Vertical and horizontal direction ± 60 ° |
Orthogonal mother riding a tube-type cutting openings |
Minimum cross-cutting angle: ± 30 ° |
Orthogonal mother tube insertion opening-cutting |
Cutting speed automatic stepless variable speed regulation |
Orthogonal and oblique cut-side branch pipe |
Continuous Cutting Set |
Orthogonal and oblique eccentric mother pipe cutting |
Fixed-point and fixed-angle bevel settings |
Orthogonal and oblique eccentric cutting branches |
Vertical pipe and slope-side cutting |
Multi-tube mother intersection pipe opening face cut |
Home bias pipe opening face cut |
Multi-pipe intersection cut-side branch pipe |
Home bias pipe opening eccentric cutting surface |
Possession of Steel Pipe Profile CNC Plasma Cutter engineering at both ends of the tube cutting bias |
Mother pipe rectangular cutting surface |
Tube welding elbow, "shrimp" oblique section cutting |
Mother trough control center, cutting eccentric |
pipe ovality error automatic tracing |
Safety set
1). Machine moving set has limit position device or safety guard device in certain position.
2). Emergency stop device in certain position.
3). Refer operator’s manual for plasma source safety guard.
4). Machine, cutting power source should grounding, control system should also isolate and grounding (C type grounding, grounding resistance under 10Ω)
Working environment
1). Power source: 3-phase 380V ±10%
2). Frequency: 50Hz
3). Place: Indoor
4). Temperature: 0℃~40℃
5). Relative humidity: ≤95% without condensation
6). Installation ground: Concrete structure, base concrete thickness ≥200mm.
7). Plasma gas (for carbon steel): O2 /Air
Plasma gas pressure and flow:
O2: 0.8Mpa, flow>4.3m3/h
Air: 0.8Mpa, no oil and water, flow>10.0m3/h
8). Flame oxygen pressure 0.7-1.0 MPa
Packaging & Shipping
Company Information
Jinan Haoyu CNC Machinery Co., Ltd. is a high-tech private company located in Jinan Shandong province.
We have been a professional manufacturer in the field of welding automation with over 10 years of
experiences. We have a strong design and technical team and we can design and manufacture the machines as customer’s requirements. Our products mainly includes automatic welding machine, robotic welding
machine, automatic cutting machine, material loading/unloading equipment, automatic assembling machine,
which are used in the areas of automobile, construction machinery, railway vehicle, electric power,
shipbuilding, pressure container, petrochemical, house appliances and military industry, etc.
The company has over 60 employees, with 8 R&D staffs and 6 quality control personnel. Our products have
been sold worldwide such as Italy, Canada, India, Mideast, etc.
FAQ
Q: Can your machine be customized ?
A: Yes, we are a professional manufacturer specialized in automatic welding
equipment more than 10 years, we have a strong design & technical team,
we can design and manufacture as per your requirements.
Q: How to get an accurate quotation ?
A: Please provide us the detail of the workpiece such as drawing or thickness and width.
Q: What’s the shipping cost from China to your country ?
A: We can send machine to your port or door address by sea or airplane.
Please kindly tell us your nearest port or address with postcode. We have reliable shipping agent
to ensure the safe,convenient and timely delivery.
Q: Payment terms, MOQ, warranty, FOB...
A: Payment terms: 30% down payment against order by T/T, the balance of 70% to be paid on
delivery.
Minimum order quantity: 1 set, FOB Qingdao.
Delivery time: about 45 days after receipt of formal order and 30% deposit.
Warranty: 12 months following delivery. We offer online service 24 hours all day long, Steel Pipe Profile CNC Plasma Cutter,
Email etc. You can contact us any time, if urgently, please call us.
Q: what’s the package ?
A: Fumigation-free plywood case with wrapping film.
Q: Do you offer teaching & training ?
A: Training at supplier’s plant.
Q: what’s policy for guarantee and broken parts ?
A: Warranty period of equipment is one year, during this time the broken parts and spares
caused by quality can be offered free.
Profile Steel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, Steel Pipe Profile CNC Plasma Cutter mechanical systems such as ventilation, air conditioning, and other mechanical systems. Strut channel is also used for other applications Profile Steel that require a strong framework, such as workbenches, shelving systems, equipment racks, etc. Specially made sockets are available to tighten nuts; bolts etc.
KJJKGJH
Profile Steel is equipped with excellent equipments including two sets 1450 reversible rolling mills,Steel Pipe Profile CNC Plasma Cutter three sets 1150 reversible rolling mills, two sets galvanizing & galvalume lines, two sets color coating lines, one set correcting machine, and one set pickling line.