eddy current testing equipment/surface crack detector made in china
1.Most advanced digital Eddy current testing system
2.Inspection passages:1 ~128
3. Diameter 2-6mm
4.ET system
eddy current testing equipment/surface crack detector
1 Introduction
This off-line eddy current detecting equipment is used in high accuracy flaw testing for workpiece that already be finished.
Automatic testing procedure: Using up-loading system, via roller way, the workpiece was sent to the eddy current detecting area, through magnetic saturation, probe, and demagnetization device, finally the off-loading system. Meantime it can automatically alarm, mark, sort according to the testing result.
2 Tested object: Small diameter tube, Small diameter bar, profiled bar(diameter2-6mm)
3 Tested material: Carbon steel, stainless steel, copper, aluminium, titanium etc. Different kinds of nonferrous and ferrous metals.
4 Testing speed: 0-120m/min
5 Testing mode: Off-line flaw detecting
6 Testing range: Diameter 2-6mm
7 Testing Standard: GB/T 7735-2004
GB/T 11260-2008
YB/T 4083-2000
GB/T 11260-2008
YB/T 4083-2000
eddy current testing equipment/surface crack detector parameters
Parameter |
1. Testing channel: 1 2 4 8 16 32 2. Frequency range: 10 Hz~10 MHz,to meet various metal material testing requirements. 3. Gain: 0 dB ~ 99 dB, continuously adjustable, the work of each file 0.1dB step 4. Phase: 0 ~ 359 °, continuously adjustable, continuously adjustable, precision 1 ° 5. Gain ratio: (X/Y)0.1~10.0 6. Testing speed: 7. Adjustable probe drive rank: 1~16 8. Fast digital / analog electronic balance 9. Non-amplitude, unsymmetrical phase alarm region setting 10. Various display: impedance, time base display 11. Digital Filtering: High-pass frequency (0Hz ~ 2000Hz), low-pass frequency (0Hz ~ 2000Hz) 12.Filtering points: 0—1024 13.Pre-amplication: 1-32dB 14. Delayed hardware output alarm, real-time hardware output alarm 15.Delayed,fixed length mark,precision0—6Automated NDT Eddy Current Testing Material Sorting System for Pipes and Tubesms/0—9999.999MM 16.Auto balance time: -1~1024 17.Multi-mode inside and outer clock, encoder I/O input and output unit. 18.Resection function for end socket and tail end signal 19. Mass storage of various test procedures and test data 20. Eddy current testing signals playback, and the defects amplitude, phase and digital value measurement 21. Automatically record and display the number and the position of defects. 22. Display modes: solid line and blanking display 23. Blanking display coefficient: 1~200 24. English and Chinese operating languages, on-line help 25. Rectangular coordinate system and polar coordinates background for choices 26. Automatically display the date and time 13. Sound-light alarm output 14. Charging power supply: 110V/60HZ 220V/50HZ Power Dissipation
|
Application |
Applied to the ndt (non-destructive) detecting of metal material. For example, weldless steel tubes, petroleum pipes, metal welded tubes, non-ferrous metal tubes, stainless steel tubes, metal plates, alloy steel, carbon steel and other metal material. |
After-Sales Service
Quality assurance, service, dispatch and training
1 Quality assurance
Quality guarantee period is one year after acceptance, calculated from the date of final acceptance of signature.
2Service
2.1Seller warrants that under normal circumstances, after receiving the user's service request (attached to no fault description) notification within 24 hours to respond, diagnostics, troubleshooting equipment appearing by Automated NDT Eddy Current Testing Material Sorting System for Pipes and Tubes, fax or e-mail.
2.2Service during the warranty period by the seller is responsible for free. Should respond within eight hours of receiving user notification in the manufacturers warranty, the buyer of the problem can not be resolved seller personnel should be within 24 hours to the site for maintenance. 5 days free repair or replacement of defective parts in order to ensure the normal operation of equipment.
2.3Normal use,After sales service and technical personnel of the Company confirmed case of failure caused by defects in workmanship or materials, and without overhaul, the instrument since the date of acceptance date 1 year warranty
2.4Product life-long maintenance.(Customers must have to fill in a detailed, real effective proof of purchase invoice and warranty card)
2.5Provide upgrades the system free.
3.Commitment to employee training
The seller will be the buyer's technical staff training:The basic principle of detection, operational procedures, equipment maintenance, etc. Through these training to ensure that the buyer technicians can master the basic principles and debugging methods provided by the seller of a comprehensive in-depth equipment,With the use, maintenance, operation and troubleshooting capabilities, and also have the technology and equipment in accordance with the requirements of the relevant maintenance capabilities.
The number of trainees |
Organizational arrangements determined by the buyer |
place |
Buyer or seller factory |
Training content |
System design principles, the detection principle, operating procedures, equipment maintenance, safety knowledge |
Profile Steel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, Automated NDT Eddy Current Testing Material Sorting System for Pipes and Tubes mechanical systems such as ventilation, air conditioning, and other mechanical systems. Strut channel is also used for other applications Profile Steel that require a strong framework, such as workbenches, shelving systems, equipment racks, etc. Specially made sockets are available to tighten nuts; bolts etc.
KJJKGJH
Profile Steel is equipped with excellent equipments including two sets 1450 reversible rolling mills,Automated NDT Eddy Current Testing Material Sorting System for Pipes and Tubes three sets 1150 reversible rolling mills, two sets galvanizing & galvalume lines, two sets color coating lines, one set correcting machine, and one set pickling line.