Lanco brand 8 inch Belt driven centrifugal slurry pump agitator

Welcome to lanco pump company

Products Introduction

Main datas:

Capacity( flow rate) : 360 ~ 828m3/h

Head :10~61 m

Speed:500 ~ 1140rpm

Impeller diameter:510mm

Pump weight:1473kg

Name: Lanco brand 8 inch Belt driven centrifugal slurry pump agitator

Structure Introduction:

1. AH slurry pump casing carries replaceable wear resistant metal or rubber liners.

The impellers are made of wear-resistant metal or rubber.

The liner of pump body and impeller for SBH pump are made of hard metal only

2. Bearing assembly is adoptable of cylindrical structure, it is easy to adjust the space

between impeller and front liner .Can be removed completely when repaired.

Bearing assembly use grease lubrication

3. The shaft seal could use the packing seal, expeller seal and mechanical seal

4. The pump discharge direction can be positioned at intervals of 45 degrees as

request and oriented to any eight positions to suit installations and applications.

Production Overview:

1) Cantilevered, horizontal, centrifugal, single stage slurry pump

2) Widely application: They are designed for handling abrasive, high density slurries

in the metallurgical, mining, coal, power plant, building material and other fields.

3) Split outer cover plate and frame plate are made of ductile iron or grey iron, protect the wear

liners and provide high operation pressure capabilities.

4) Long bearing life: The bearing assembly is with large diameter shaft and short overhang

minimizes deflection and vibration. Heavy duty roller bearings are adopted with Lithium white

Grease and housed in a removable bearing cartridge. No leakage, a little maintenance,

convenient rotor adjustment.

5) Shaft sleeve let Shaft life Lanco brand 8 inch Belt driven centrifugal slurry pump agitator: A hardened, heavy-duty corrosion-resistant shaft sleeve with ‘o’ ring seals at both ends protects the shaft.

6) Wear resistant and anti-abrasion wet parts: The wet parts can be made of hard metal (26-35% Chrome alloy) or pressure molded rubber. More materials are also available.

7) Easily replaceable liners: Liners are bolted to the casing.

8) Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple.

9) Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing

housing.

10) High efficiency and high head design are also available. The liners and impellers for high-head pumps are adoptable of hard metal only.

11) Centrifugal shaft seal, mechanical shaft seal and packing shaft seal are available.

12) Pump’s discharge angle can be revolved per 45°, so eight different angles to different using.

13) Power source: 3phase, 50Hz or 60Hz

14) Medium temperature should not exceed 40°C.

15) Solid particles maximum density by weight in medium: gray sediment for 45%, mineral

sediment for 60%

Curve