This W11 plate rolling machine with extra function,such as bending angle steel,bar steel,flat steel. for rolling plates into cyliners.Upper roller can travel in vertical direction.The lower rollers are driven through the motor and speed reducing motor.The height of lower rollers is fixed, it is convenient for feeding plates.
This machine is widely used in the fields of boilers, ship manufacturering,petrols and so on.
Major Parameters
Model |
Unit |
W11-20*2000 |
Max plate thickness |
mm |
20 |
Max plate length |
mm |
2000 |
Roller working length |
mm |
2050 |
Mini rolling thickness |
mm |
4 |
Diameter of upper roller |
mm |
Φ280 |
Diameter of bottom roller |
mm |
Φ240 |
Central distance between bottom rollers |
mm |
359 |
Mini diameter when max rolling: |
|
590 |
Rolling speed |
m/min |
About 4 |
Major motor power |
KW |
11 |
Note: the design of the machine is taken 245Mpa as the standard.
Structures
a. major elements
1. rollers:the most important part of the machine, it is made of carbon steel.
2. frame:there are two frames in both sides, the bottom is fixed on the seat by nuts and they are connected through a connecting shaft to keep in the right position. The guide screw connects the worm wheel and the actions of upper roller is driven by this part.
3. gear box: ZSY/BW/WDH standard types are adopted.
4. balance elemetn:it is in the major speed reducer side, it is used to keep the balance of upper roller when unloadeing the plate.
5. underpan:it is made up of channel steel and plate, frames, gear box, motors and so on are all fixed on it.
6. Electrics:it is made up of operation box and motors.
b. Transimision Elemen
1. Major transmissin: bottom rollers are the major ones, they re driven by the speed reducer and gear box.
2. Assitant transmission:the movement of upper roller is driven by the assitant motor.concavo-convex clutch is fixed on the transmssion shaft. It is used to adjust the parallel degree between upper and bottom rollers.
Profile Steel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, plate rolling machine bending flat steel/profile stell/pipe mechanical systems such as ventilation, air conditioning, and other mechanical systems. Strut channel is also used for other applications Profile Steel that require a strong framework, such as workbenches, shelving systems, equipment racks, etc. Specially made sockets are available to tighten nuts; bolts etc.
KJJKGJH
Profile Steel is equipped with excellent equipments including two sets 1450 reversible rolling mills,plate rolling machine bending flat steel/profile stell/pipe three sets 1150 reversible rolling mills, two sets galvanizing & galvalume lines, two sets color coating lines, one set correcting machine, and one set pickling line.