WELCOME TO AIER MACHINERY
high pressure metal wet parts oilfield sand pump
Product Description
WS/WSG gravel pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurries in mining, explosive sludge in metal smelting, dredging in dredger and course of rivers, and other fields. Type WS(G) pumps are of high-head ones.
Typical Applications
Tailings, sugar beet, dredging, slag granulation, cyclone feed, slag granulation, suction hopper dredging, barge loading, mill discharge, sand reclamation, booster pumping, sand waste, material transfer, etc.
PUMP PARTS LIST
| Part Name | Material | Specification | HRC | Application | OEM Code |
| Liners & impellers | Metal | AB27: 23%-30% chrome white iron |
≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
AB15: 14%-18% chrome white iron |
≥59 |
Used for higher wear condition | A07 | ||
AB29: 27%-29% chrome white iron |
43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 | ||
AB33: 33%-37% chrome white iron |
It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. | A33 | |||
| Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 |
A05 |
| Grey iron | G01 | ||||
| Shaft | Metal | Carbon steel | E05 | ||
| Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt | Stainless steel | 4Cr13 | C21 | ||
| 304 SS | C22 | ||||
| 316 SS | C23 | ||||
| Joint rings & seals | Rubber | Butyl | S21 | ||
| EPDM rubber | S01 | ||||
| Nitrile | S10 | ||||
| Hypalon | S31 | ||||
| Neoprene | S44/S42 | ||||
| Viton | S50 |
Application
Packaging
Company Information