Product Description
multistage mission centrifugal pumps parts specification
- Adopt unique simple vane or double vane impeller structure, greatly improve the through capacity of the contamination, can effectively through the pump five times of pump diameter fiber material and about 50% of the solid particles.
- Mixer mechanical seal using new hard decay resistance of tungsten carbide as material, at the same time will improve as the double end face seal, seal the indoor running in oil for a long time, can make the safe running more than 8000 hours continuously.
- Pieces of whole compact structure, small volume, low noise, energy-saving effect is remarkable, maintenance is convenient, without having to build pump room, working while being submerged into water, and greatly reduce the project cost.
- In pieces to the sealing oil pump chamber has a high precision anti-interference leakage detection sensor, and embedded in the stator winding temperature sensitive components, absolute protection of pump motor.
- Mixer can equipped with automatic security control cabinet, according to the needs of the user of the pump leakage, leakage, overload and overtemperature of absolute protection, improve the security and reliability of the product.
- Float beginning may vary according to the required level, automatically control the start and stop of pump, without modes, use very convenient.
- Pieces according to the user, can be fitted with double rail automatic coupling installation system, which brings very much convenience to installation an d maintenance, people can not into the sump.
- Pieces can be used within the scope of the total head, with no overload of motor.
*******************************************************************
We supply the best products at competitive prices, and bring you the best service available!
Our manufacture processes
1. Our Product: multistage mission centrifugal pumps parts
| General Capabilities Performed | Analysis of Fabricated Product Suitability |
| Design for Manufacturing (DFM) | |
| Process Review | |
| Fixturing and Tooling | |
| Casting Methods Available | Investment Castings Sand Castings Permanent Mold Castings |
| Lost Foam Castings Shell Mold Castings Precision Machined Castings | |
| Centrifugal Castings | |
| Forging Methods Available | Open Die Forgings |
| Closed Die Forgings | |
| Seamless Rolled Rings | |
| Casting or Forging Features | Rough Condition |
| Pre Machined | |
| Finish Machined | |
| Materials We Work With | Low/Medium Alloy Cast Steels |
| High Strength / Hardened / Temperature Resistant Steels | |
| Corrosion and Temperature Resistant Stainless Steels | |
| Wear and Impact Resistant Steels and Iron | |
| Grey, Ductile and Cast Iron | |
| Aluminum | |
| Stainless | |
| Bronze | |
| Casting Height | Varies - Recent experience up to 6 feet in height |
| Tolerance | Per ISO 8062 DCTG 4 to 12 depending on casting size & material |
| Inspection Services Performed | In Process |
| Post Production | |
| Final | |
| Fixtures and Gauging | |
| Coordinate Measuring Machine (CMM) | |
| Testing Services Performed | Destructive |
| Non Destructive | |
| Hardness | |
| UT | |
| X-Ray | |
| Mag Particle Inspection | |
| Liquid Penetrant Inspection | |
| Metallurgical Analysis | |
| Failure Analysis | |
| Quality Assurance | ISO culture with Six Sigma skills |
| ISO 9001 Certified Quality Management Systems | |
| ISO/TS16949 Automotive QMS | |
| ISO 14000 Certified EMS | |
| 5 Why Root Cause Analysis | |
| 8 Discipline (8D) Problem Solving | |
| Error Proofing (Poka Yoke) | |
| Statistical Process Control | |
| MRP/ERP Systems | |
| Complex Metrology per ASME Y14.5 | |
| Documentation | Material Test Reports |
| Dimensional Inspection Reports | |
| Heat Treatment Charts | |
| Packing & Shipping Documents | |
| FMEA | |
| PPAP | |
| Control Plan | |
| Additional Services | Full Pattern Shop |
| Kitting | |
| Design Fixturing and Gauging | |
| Production Volume | Short Run to Large Run Production |
2.multistage mission centrifugal pumps parts Additional Information
| Industries Served | OEM Components Automotive Oil and Gas Hydraulic Railroad Industrial |
| Mining Construction Agriculture Waterworks Wind Solar | |
| Intended Applications | Hydraulic and Actuator Components |
| Oil & Gas Components (shafts, pinions, valve bodies) | |
| Automotive Engine Components (shafts, pinions, bushings, wheel hubs, cylinder blocks, intake manifolds, exhaust manifolds, starter spacers, pulleys, engine mounting brackets, water transfer connections) | |
| Industrial OEM Castings and Forgings | |
| Rail Track Accessories (clips, jaws, hook twin tie plates, crossing parts, track bolts) | |
| Locomotive counterweights | |
| Aggregate Crusher Wear Parts and Hammers | |
| Waste Industry Components | |
| Steel Pipe Flanges | |
| Valve Bodies | |
| Flowmeter Components | |
| Equipment Components | |
| Hydraulic Rod | |
| Clevis | |
| Actuator Components | |
| Counterweights | |
| Mining Counterweights, Hammers, Wear Parts and Augers | |
| Rotary Kiln Rings | |
| Industrial Machinery | |
| Wind Tower Components | |
| Pumps | |
| Valves | |
| Meters | |
| Agriculture Equipment Components and Attachments (cultivator wear parts, track pads, other wear parts) | |
| Industry Standards Met | ISO 9001 |
| TS 16949 | |
| AWS D1.1 | |
| ASME Section IX | |
| QMS | |
| Efficiency | Six Sigma Certification (Black Belt) |
Lean Manufacturing |
3.Metal Casting versus Forging Comparison Chart
| Metal Processes | Cast craft | Size Range | Surface Texture | Tooling Cost | Tolerances / Reproducibility (refer to DCTG table) | Cost per Piece | Potential for Internal Defects | Suited for High Volume Production | Processes ability to handle complex designs | Wide Range of Alloy Materials Used |
| Metal Forging Processes | Open Die | 1 LB - 1000 LBS | Smooth | HIGHER | Approx. ±0.17" | MEDIUM | LOW | GOOD | GOOD | BEST |
| Closed Die | Smooth | HIGHER | Approx. ±0.065" | MEDIUM | LOW | BEST | GOOD | BEST | ||
| Metal Casting Processes | Green Sand Mold | 1 LB - 2000 LBS | Rough | LOWER | DCTG 11 - DCTG 14 | HIGHER | MEDIUM | FAIR | BEST | BEST |
| No-Bake Mold | 1 LB - 10000 LBS | Smooth | MEDIUM | DCTG 3 to DCTG 8 | MEDIUM | MEDIUM | GOOD | GOOD | BEST | |
| Resin Shell Mold | 1 LB - 10000 LBS | Smooth | HIGHER | DCTG 8 - DCTG 12 | MEDIUM | LOW | FAIR | GOOD | BEST | |
| Permanent Mold | 1 LB - 100 LBS | Fine | MEDIUM | DCTG 3 to DCTG 8 | MEDIUM | LOW | GOOD | GOOD | GOOD | |
| Die Cast | Approx. 75 LBS MAX | Fine | HIGHER | DCTG 3 to DCTG 8 | LOWER | HIGH | BEST | FAIR | FAIR | |
| Investment Cast | Approx. 75 LBS MAX | Fine | MEDIUM | DCTG 3 to DCTG 8 | HIGHER | MEDIUM | FAIR | BEST | BEST | |
| (lost wax) | ||||||||||
| Expandable Pattern | 1 LB - 1000 LBS | Smooth | LOWER | DCTG 8 - DCTG 12 | MEDIUM | HIGH | GOOD | GOOD | GOOD | |
| (lost foam) | ||||||||||
| multistage mission centrifugal pumps parts ("V") Process Mold | 1 LB - 2000 LBS | Fine | MEDIUM | DCTG 8 - DCTG 12 | HIGHER | LOW | FAIR | GOOD | GOOD | |
| Centrifugal Mold | 1 LB - 100 LBS | Fine | MEDIUM | DCTG 8 - DCTG 12 | MEDIUM | LOW | BEST | FAIR | GOOD |
Customizable Some Samples
Impellers
Shaft sleeve
Pump parts
The one corner of our factory
Finished casting
Packaging & Shipping
Products packing
Xian Guangxing Mechano-Electronic Co., Ltd.,founded in 2008, is located in Shaanxi. We are a professional enterprise engaged in the manufacture and sale of stainless steel products and castings. We can supply a wide range of products to meet ever-changing market demands. Customized orders are welcomed. We are increasingly expanding our international market share based on quality products, excellent services, reasonable prices and timely delivery.
Please contact us at any time for more information.We will be very glad to receive any of your inquiry, and provide you our best service and products efficiently .